PopAds.net - The Best Popunder Adnetwork

Sunday, 16 November 2014

How to create bootable USB device without software


 
        Step 1 » Click Start>All Programs>Accessories
        Step 2 » Right click on Command Prompt>Run as Administrator
        Step 3 » Type ‘diskpart' and press Enter to start the built in Windows disk partitioning utility
        Step 4 » Type 'list disk' and press Enter. Identify your USB Flash drive and make a note of the disk number. Here in this example, My USB flash drive is Disk 1.
        Step 5 » Type 'select disk 1' and press Enter.
        Step 6 » Type ‘clean’ and press Enter. The clean command will remove partitions or volume formatting from the selected disk (disk 1) by zeroing sectors.
        Step 7 » Now to create a partition, type 'create partition primary’ and press Enter.
        Step 8 » Type 'select partition 1', and press the Enter key.
        Step 9 » Type ‘active’, and hit the Enter Key.
        Step 10 » To format the partition using FAT32 file system, type ‘format fs=fat32’ and press the Enter key.
        Step 11 » Type 'assign' and press the Enter key to assign a drive letter to your USB flash drive.
        Step 12 » Type 'exit' to exit the diskpart utility.

Your USB flash drive is now ready to be used as an installation media. All you need to do is copy the entire contents of the Operating System DVD to your newly prepared USB flash drive. Plug the USB flash drive to the computer and reboot to begin the installation.

Note: Make sure to set the first boot device to ‘USB flash drive’ from the BIOS.

Download this trick steps with images in pdf

How to create bootable USB device without software [vaiRAvi].pdf (367,4 kB)

1 comment:

  1. Hello.. your blog is great. I read your blog and like it very much. Thanks for sharing.
    How to Delete Administrator Password Without Software

    ReplyDelete

PopAds.net - The Best Popunder Adnetwork